How can i switch colors on my icon?

Answer:

You involve to be more specific. What icon? Icon on your desktop? Icon on IM. Icon on Yahoo!



Please rephrase your ask and ask again. I apologize for the delay within providing this response however I can only work through these so prompt.

how can i stop my tft display from flickering when you scroll down or up?

Answer:

Many reason:

- right click on "my computer" , goto properties > hardware > device manager and below "display adaptors" see if your graphic card is nominated

if it is not ( or it has a wan mark on it), install the correct drivers for it .

This is the most adjectives cause.
It's not a monitor problem.

Means you are running low on memory.
control panel - display - settings - advanced - monitor - eyeshade refresh rate <=== the maximum [85mhz maybe] your display can fiddle with !
Flicker is come because u have a low revitalize rate with low resolution.



try incline your refresh rate, but don't lift it to much, ur tft display wil out of resolution...
Change the refresh rate to as efficient as it will go.



If this does not modernize the situation, you prberbly need a newer graphics card next to some more memory: AGP 8X with 256Mb, wonderful for gaming, or a new PCIe card if your computer have an enhanced slot.



Good Luck
hip hop abs program

How can I stop my computer blind from shaking?

Yesterday my parents unplugged the computer and moved it so we could paint the room. After placing them support, she cleaned them, including the screen. Now my blind (particularly the bottom-right) is vibrating wildly. This happened later time we cleaned the other monitor (we have two computers). All I could do be increase the refresh rate, which lessened the problem, but didn't acquire rid of it.



Anyone know what's wrong?


Answer:

right click. graphics properties. monitor properties, change the energize rate, flicker setting.
If you moved it close to anything that puts out electromagnetic energy,such as a generous appliance then it will do it,or cell phones can also do it.Or you may hold moved it to place on your wall where in that is a 220 electric wire running through it.I would try moving it somewhere else...apposite luck
degaussing cable is bad
possibly you enjoy too much electronics close to your system? such as speakers and such?

How can I spot a discouraging solder reciprocated?

Answer:

The solder have not flowed onto and around the joint, but is a short time ago sitting on top of it resembling a bead. To get a honest joint, you enjoy to transfer some boil from the iron into the leads man soldered, not just to the solder. The opinion is to get the solder to flow into and soak the cohesive before solidifying.
The solder should be shiny and here should be evidence of flowing solder.
A bad solder integrated will appear as flat or dull in color, be as a good integrated will be bright and shiny. A dull looking joint is call a cold joint and will not hold as strongly.

how can I set up two monitors using win xp?

Answer:

Install a second Windows XP compatible video card and monitor. Right click anywhere on the desktop where on earth there isn't an god and select properties. Click the settings tab. Here you will find where to setup the second monitor.

It is noteworthy you use a Windows XP compatible video card. I did it using a video card out of an old computer. My computer started have problems with arbitrary lockups. I installed a new video card and everything presently works great.
Ultramon. Good luck!
You have to hold a video card that supports dual output. Once you have that, plug both of the monitors to the card and turn it on.. Goto the display propterties and choose "extend my desktop on to this"
There are cool unknown monitors that come configured to run on XP without varying the configuration of your PC. See the links below.



We just get a couple here at work and all we have to do was plug them surrounded by.
You don't need a dual guide video card to have dual peak.



You can install as many video cards as you want and own each one goto a separate monitor. But you are fixed to the number of PCI/AGP/PCIex Slots available on your PC.



If you don't have room for another video card afterwards try this device.

http://www.matrox.com/graphics/offhome/t...

Comes out this month

If all you want is dual blind try the Dual Head version.

http://www.matrox.com/graphics/offhome/d...
open up widgets

How can I set up dual monitors on Windows XP?

I'm on a Thinkpad T42 that's dual booted near Windows XP and Ubuntu Linux. Dual head works on Linux but not on Windows -- within the CP's Display Options, I see no other screen to select. The Microsoft website say, "You must first install the compatible video adapter hardware, and connect the additional monitors." Dual judgment used to work on XP before I reinstalled it on a FAT32 wall last year, so I regard I have adjectives the necessary hardware. Does anyone know how I could fix this? (Incidentally, I also can't modify the peak refresh rate, which is amazingly slow.)


Answer:

Sounds like you involve the correct drivers for Windows. Pop across to the ATI website & download the latest.
http://www.microsoft.com/windowsxp/using...



Simple!



Cheers!

How can i set peak resolution to 1440x900??

I own just installed visa ultimatewith a brand unmarked 7600gt graphics card, but i cant find 1440x900 anywhere on the resolution slider. it has adjectives resolutions up to 1280x800, then 1280x1024, and finally 1920x1080!!



how can it not enjoy 1440x900, this is very strange...any design?


Answer:

yes update drivers